SUPERCHIPS FIREFLY LAZER BOOST & EGT GAUGE #49001 NEW

This Boost/EGT gauge was designed to plug into the PN 3601 Superchips Firefly device or other inline controllers. It will not work without having an external controller and does not come with any sensors.

Superchips Lazer EGT, Power Level and Boost Gauge, 2 1/16" PN 49001

The Superchips Lazer EGT / Power Level / Boost Gauge can display exhaust gas temperature from 400 to 1600 F with a 140 clockwise sweep. Power level is displayed in four graduated steps with a 25 clockwise sweep. Boost pressure is displayed from 0 to 50 PSIG with a 110 clockwise sweep. It features programmable peak exhaust gas temperature and boost point alarms that will flash the portion of the arc above the programmed high values. The alarm points are easily adjusted by the user using the touch face programming capability. The gauge will also display peak EGT and boost pressure reached with a dot of light.
The 49001 is a serial input display gauge that displays information received from the inline controller over the serial interface between the gauge and controller. No sensors are connected to the 49001, but the controller must remain connected to communicate the EGT, Power level and Boost pressure data to the gauge. The gauge can also send edit data when the touch face switch is activated to set the high EGT alarm value, the Power Level value and the high Boost alarm value to the controller.

Breakthrough Technology! Never before has there been such a breakthrough in gauge technology as the Superchips Lazer gauge made by MSD. Look closely at the face of the gauge and the first thing you'll notice is that there's no needle. Look closer and you can see that there's no visible lights or LED's in the background. This alone give the Lazer gauge a fresh and welcomed appearance in the form of gauges, but there is much more to the Lazers than meets the eye.