| VATP4Z - 4 Zone Distributed Audio Package Model #: VATP4Z Vista Acoustics by Bazooka Audio distributed audio bundle for everyone. This is the perfect speaker bundle to install speakers in 4 rooms, and includes four pairs of in-ceiling speakers, 4 volume controls, and one load ditribution panel Standard System Includes:. 1 VAP180 Load Distribution Panel
4 pair VR6 in ceiling 6" speakers
4 VAVC60R volume controls Features:
4 Zones of distributed audio.
Load Management Center
Impedance Matching Volume Controls.
Expandable up to 8 Zones. Vista Acoustics VR6 In-ceiling Speakers Info The New Vista Acoustics VR Series of In ceiling speakers are ideal for any multi room, or home theatre application. The pivoting soft dome tweeter and injected molded cone assembly provide excellent frequency response for your listening pleasure. The white paintable baffle with integrated mounting toggles makes installation quick and easy. We also include a cut out template, paint shield and installation guide. This flat white aluminum grill is also paintable and seamlessly blends in with any d cor. Features:
20MM Pivoting silk dome tweeter
6.0 inch polypropylene woofer
12 Db built in acoustic crossover
Integrated mounting toggles for easy installation
Paintable white flat aluminum grill
Speaker Cut-out template
Paint plug for speaker baffle
Frequency response: 80 Hz to 20 KHz
Nominal Impedance: 8 Ohms
Power Handling: 60 Watts
Mounting Depth: 2.85 inches 75 MM
Mounting Cut Out: 7.6 inches 198 MM
Overall Diameter : 9.0 inches 235 MM VAVC60R - Impedance Matching Rotary Volume Control Info Vista Rotary Impedance Matching Volume Control (Bone, Ivory, and white plates and knobs included)
120 watts Peak / 60 watts RMS Power Handling
Impedance Matching: x1, x2, x4, x8 selectable settings. VAP180 - Impedance Matching Speaker Distribution Panel Info The Vista Acoustics Impedance Match Panel VAP180 distributes one speaker level stereo signal to 8 stereo listening zones. The resistors mounted on the PC board ensure that the amplifier sees a minimum impedance load of 5 Ohms depending on how many zones have been configured.
Please refer to the following table showing the impedance load the amplifier will see depending on how many zones are connected with a single pair of 8 Ohm loudspeakers.
# of Pairs/4 Ohm Load: 1 Pair/12.00, 2 Pairs/8.00, 3 Pairs/6.67, 4 Pairs/6.00, 5 Pairs/5.60, 6 Pairs/5.33, 7 Pairs/5.14, 8 Pairs/5.00
It is not recommended to connect more than one pair of speakers to each speaker output zone on the VAP180. The PC board mounted input terminals black are rated at 30 amps and are capable of accepting up to 10 gauge speaker wire. The angled speaker output terminals green are rated to 15 amps and will accept up to 12 gauge speaker wire.
The white powder coated metal enclosure features a vented front panel which is easily removed by the supplied hardware. This enclosure also features multiple wire knockouts and protective grommets to allow the wiring to be accessed from the sides or the top of the cabinet. The enclosure also has alignment notches on all 4 corners to ensure proper mounting depth for both 1/2 and 5/8 drywall/sheetrock applications.
Cabinet is 250mm x 305mm x 89mm , cover is 305mm x 356mm. |
Shopping Cart - 0 item(s) / Total: $0.00
